😱Having rust problems on all kinds of metal surfaces?
Don’t worry! Our Water-based Metal Rust Remover will help you solve the problem easily. It isthe easiest-to-apply, fastest drying rust converter.It willdry within 20 minutesafter brushing.
Ittransforms existing rust into a black protective polymer barrier, which isweatherproofand can give metal objects a fresh coat of paint. And it willprovide twice as much rust protection.
This rustproof treatment prevents future rust and corrosion by isolating moisture from rain and snow. No more worryingabout metal objects exposed to rain or snow.
[Convert Existing Rust]- Ittransforms the existing rust into ablack protective polymer barrier, which is weatherproof and can give metal objects a fresh coat of paint. And willprovide more than twice as much rust protection.
[Prevent Future Corrosion]-This rust treatment prevents future rust and corrosion by isolating moisture from rain and snow.
[Eco-Friendly]- It isnon-flammable, low VOC, water-based treatment,non-toxicand eco-friendly. Suitable for indoor and outdoor use.
[Protect Iron and Metal Surfaces]- It can quickly andeasily remove rust and restore the original primer colorof metal objects. It revives and protects iron and metal surfaces on automobiles, car chassis, dumpsters, equipment, railings, chains, etc.
[Easy to Use]- Wipe the dust and water stains clean off the metal surface, apply rust remover with a brush (included), and wait for 20 minutes to dry. Quickly form a protective film, prevent rust repeatedly. No more scraping, sandblasting or grinding!
🪄Surface treatment:Use wire brush or sandpaper to remove large rust and scale particles. Clean the surface thoroughly to remove dirt, dust and grease.
🪄Application:Shake well or stir well before use. Use a brush, roller or pump sprayer to apply two coats with at least 20 minutes of drying time between the two coats. Allow 48 hours of curing time before applying high-quality paint.
🪄Cleanup:The application equipment should be cleaned immediately with soap and water.
🪄General:Do not use this product if the surface temperature is below 50°F. Store in a cool, dry place to prevent freezing or temperatures exceeding 100°F. In order to protect the iron surface for a long time, the cured rust inhibitor coating should be sealed with two layers of high-quality oil-based paint. No other primer is needed.
1kg product can brush 5-15 square meters or larger area, depending on how thick you brush. (The thinner you brush it, the bigger the area. Conversely, the thicker you brush it, the smaller the area.)
Do not apply this product if the surface temperatures are below 50°F.
Store it in a cool, dry place, protected from freezing or temperatures above 100°F.